Re: Udp w2k not higher than 1Mbps

To: iperf-users --at-- dast.nlanr.net
Subject: Re: Udp w2k not higher than 1Mbps
From: Jordi Meya <jmeya --at-- mat.upc.es>
Date: Fri, 08 Oct 2004 08:48:57 +0200
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=us-ascii; format=flowed
In-reply-to: <5.1.0.14.2.20041007102518.0252aad0 --at-- pop.ncsa.uiuc.edu>
References: <5.1.0.14.2.20041007094017.024ee840 --at-- pop.ncsa.uiuc.edu> <3.0.5.32.20041007064732.010c6d58 --at-- pop.ncsa.uiuc.edu> <3.0.5.32.20041007064732.010c6d58 --at-- pop.ncsa.uiuc.edu> <5.1.0.14.2.20041007094017.024ee840 --at-- pop.ncsa.uiuc.edu> <5.1.0.14.2.20041007102518.0252aad0 --at-- pop.ncsa.uiuc.edu>
Reply-to: iperf-users --at-- dast.nlanr.net
Sender: owner-iperf-users --at-- dast.nlanr.net
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.3) Gecko/20040922

That may help a bit! :-(
Sorry for the silly question then... I will re-check asap.
thanks for the quick answer.
jordi.

Jim Ferguson wrote:

> Jordi,
>
> Lowercase "b" for UDP bandwidth. A "B" is for binding, typically (but 
> not always) when you are doing a multicast test.
>
> -Jim F.
>
> At 05:16 PM 10/7/2004 +0200, you wrote:
>
>> Yes... I set
>> "iperf -c 1.1.1.1 -u -B 20M"
>> isn't it the right way?
>>
>> Jim Ferguson wrote:
>>
>>> Jordi,
>>>
>>> You'll need to specify a higher rate of transmission for the UDP 
>>> test. By default, it is set to 1 Mbps.
>>>
>>> -Jim F.
>>

References:
- Re: Udp w2k not higher than 1Mbps
  - From: Jim Ferguson
- DAST: anton.wueest --at-- rieter.com - Iperf
  - From: Mitch Kutzko
- Re: Udp w2k not higher than 1Mbps
  - From: Jim Ferguson

Prev by Date: Re: Udp w2k not higher than 1Mbps
Next by Date: Re: UDP packet error
Previous by thread: Re: Udp w2k not higher than 1Mbps
Next by thread: Re: Udp w2k not higher than 1Mbps

Other Mailing lists | Author Index | Date Index | Subject Index | Thread Index