RE: bug report
I normally get this error if I don't properly kill my prior iperf runs.
Thanks,
Sam
-----Original Message-----
From: owner-iperf-users --at-- dast.nlanr.net
[mailto:owner-iperf-users --at-- dast.nlanr.net] On Behalf Of Szalai Norbert
Sent: Wednesday, September 20, 2006 7:34 AM
To: iperf-users --at-- dast.nlanr.net
Subject: bug report
Hi,
I think I've found a bug in Iperf 2.0.2. (Iperf 1.7.0 works fine.)
I downloaded the source from http://dast.nlanr.net/Projects/Iperf/,
and compiled it successfully under Debian unstable.
My server has two IP adresses on the same NIC (192.168.79.1/24 and
192.168.79.100/24), and I wanted to try the iperf's --bind and
--dualtest feature. The dualtest feature doesn't work when I try to
connect to the
secondary IP address (192.168.79.100), no matter if I enable or disable
--bind.
I connect from 10.168.79.1. (iperf -c 192.168.79.100 -d)
Without the --bind feature I got this error on server: "write2 failed:
Connection reset by peer"
nszalai --at-- norbiradius:/$ iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 9] local 192.168.79.100 port 5001 connected with 10.168.79.1 port
3352
------------------------------------------------------------
Client connecting to 10.168.79.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 10] local 192.168.79.1 port 1566 connected with 10.168.79.1 port 5001
write2 failed: Connection reset by peer
[ 10] 0.0- 0.0 sec 18.3 KBytes 29.3 Mbits/sec
[ 9] 0.0- 3.7 sec 20.5 MBytes 47.0 Mbits/sec
WITH --bind enabled: "bind failed: Address already in use", "write2
failed: Connection reset by peer"
nszalai --at-- norbiradius:/$ iperf -s --bind 192.168.79.100
------------------------------------------------------------
Server listening on TCP port 5001
Binding to local address 192.168.79.100
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
bind failed: Address already in use
[ 6] local 192.168.79.100 port 5001 connected with 10.168.79.1 port
3177
write2 failed: Connection reset by peer
------------------------------------------------------------
Client connecting to 10.168.79.1, TCP port 5001
Binding to local address 192.168.79.100
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 7] local 192.168.79.1 port 1560 connected with 10.168.79.1 port 5001
[ 7] 0.0- 0.0 sec 18.3 KBytes 33.3 Mbits/sec
[ 6] 0.0- 1.9 sec 10.6 MBytes 47.4 Mbits/sec
Have you ever met this problem?
Best Regards,
Norbert